Shockwave


An effect simulating the shockwave from an explosion, or the ripples of an object thrown into water.

Center X: Sets the horizontal position where the pattern is centered from. This control has a range of 0-100 where 50 is the horizontal center.

Center Y: Sets the vertical position where the pattern is centered from. This control has a range of 0-100 where 50 is the vertical center.

Start Radius: The radius that the effect starts from. This is the starting size.

End Radius: The radius that the effect finishes on. This is the final ending size.
* Note: the direction of the movement can be reversed by swapping the start and end radius values.

Start Width: The Width of the ripple at the start of the effect.

End Width: The width of the ripple at the end of the effect.

Acceleration: The increase in movement speed over the duration of the effect.

Color Gradient: The color or gradient used to color the effect. If a gradient is used, it is applied to the whole effect over the duration of the effect.

Blend Edges: When checked, adds smoothing to the leading and trailing edge of the ripple. When unchecked the ripple will have a hard edge.

Intensity: The overall brightness envelope over the duration of the effect.